Amimon Connex Aerial Wireless HD Video Kit
Availability: | On backorder |
Delivery time: | Temporary not in stock, expected deliverytime 1-3 weeks |
Amimon Connex Aerial Wireless HD Video Kit
Amimon’s CONNEX provides a high-end, high-performance wireless HD connection that can operate in challenging unmanned air or ground platforms under harsh conditions with zero latency!
The small and lightweight CONNEX system transmits commercial, industrial, inspection and monitoring video in real time to its Ground Unit, which can be located up to several 100 meters away.
CONNEX by AMIMON from airV8 on Vimeo.
Key Features:
- True full HD 1080P at 60fps
- Up to several 100 meters range (LOS)
- Zero latency, real-time video
- Extremely resilient 5GHz digital link
- Automatic Frequency Selection (AFS) that fully complies with regulations and automatically selects the best free frequency available
- Encrypted and secure
- Sturdy design for harsh conditions
- Built-in OSD view with embedded MAVLInk-based telemetry
- Gimbal control over Futaba® S.BUS
- Plug-and-Fly, ready to operate out of the box
- DFS support enables multiple free channels, thus boosting robustness
Air Unit:
The Air Unit is connected to an aircraft in order to capture video from the aircraft camera and to transmit it to up to four Ground Units simultaneously (multicast), thus creating a wireless video link.
Ground Unit:
The Ground Unit connects to various types of monitors, video goggles or a portable video monitor via the HDMI port. This enables the pilot and/or camera operator to monitor the video transmitted from the Air Unit.
Pilot:
The pilot can view the video on a monitor or wear video goggles connected to the Ground Unit. Flight control (telemetry) information from the aircraft is overlaid on the video. The pilot uses a remote flight controller (not included) to control the aircraft.
Camera Operator:
The camera operator can hold a portable or PC video monitor on which the video can be viewed. The camera operator can use a gimbal remote control to control the aircraft camera?s gimbal through the S.BUS port of the Air Unit.
In the Box:
- Air Unit (Transmitter)
- Ground Unit (Receiver)
- Antennas and cables
Technical specifications
General
Transmission Distance Outdoor | Several hundred meters (LOS) |
Transmission Delay | Zero [Less than 1 msec.] |
Radio Frequency | 5.1-5.8 GHz, 17 channels |
Channel Selection | Automatic frequency selection [AFS] |
Video Formats | 60/59.94, 1080p/50, 1080i/60, 1080i/50, 30/29.97, 24/23.98, 60/59.94, 720p/50, 480i/60, 576i/50 |
Multicast Mode | Up to 4 receivers with no delay or quality degradation. [Requiring extra Ground Unit(s)] |
OSD Support | MAVLink Telemetry based |
Encryption | AES-128 & RSA 1024 for key exchange |
Operating Temperature | 0-45° Celsius |
Regulation | CE, FCC, MIC |
Air Unit
Video Interface | Mini HDMI |
Antenna Connectors | MMCX (x2) |
Power Connector | 4-pins |
Power Input | 8-26V (3S-6S) |
Dimensions | 103 x 63.6 x 15.6mm |
Weight | 120 grams |
Ground Unit
Video Interface | HDMI (Type A) |
Antenna Connectors | SMA (x5) |
Power Connector | DC round |
Power Input | 7-19V |
Dimensions | 129 x 89 x 20mm |
Weight | 290 grams |